Our Products

Borana Brochure

Download  latest Full range of Borana Pumps Brochure

How Can We Help?

Enquire Now

Submersible Motor

Borana has a wide range of Submersible electric motors in different voltages from series 4” to 10” that suit various kinds of user requirements. As per NEMA standards, Borana made Submersible motors of 100 % stainless steel with accuracy and innovative technique. Without having any priming and suction problems, these Submersible motors are very easy to assemble, dismantle and repair. Submersible motor contained within rubber sock to maintain the pump’s dryness.

The body of the Borana Submersible motor is made with anti-corrosive material which restricts the corrosion to have happened in the Submersible pump, thus causing low maintenance, high durability, and higher efficiency. We also manufacture and provide all the essential parts of the Submersible motors to the suppliers.

Stainless steel Submersible motors are electric motors that are sealed in Submersible pumps to power the mechanism of pumping i.e. pump the water out of the surface. Submersible motors are meant to be water-tight to prevent the arrival of water inside and damaging the motor.

A Wide Submersible Motor Range

50 HZ Submersible Pumps

Borana’s wide ranges of 50 Hz submersible pumps are available in various sizes. Submersible pump range is ideal where water requirements are substantial and expenditure on power a major consideration.

Download Brochure
  • 4” Motor Series - MCIP 100/100.5/101
  • 4” Motor Series - PRE/100/100.5/101 (Resign Cooled)
  • 6” Motor Series - BMSF C-150
  • 6” Motor Series - BSM-150
  • 6” Motor Series - BSM-150
  • 10” Motor Series – BSM 250

Materials

Motors are built in CI-FG -260/ SS AISI 304/SS AISI 316 etc.

Standards

Protection: IP68

PE2/PE Winding insulation for Max atmospheric temp.

Non-Contaminating FES 93 filling.

NEMA Standard coupling dimensions.

Lead material in accordance with regulation for drinking water.

Bore Dia & Power/Phase/Voltage Range:

We offer a complete submersible motor range in different voltages:

  • 4” motors, Three-Phase up to 7.5/5.0 HP/Kw (Rewindable)
  • 6” motors, Three-Phase up to 3.0-40.0/2.2-30.0 HP/Kw (Rewindable)
  • 6” motors, Three-Phase up to 3.0-40.0/2.2-30.0 HP/Kw (Rewindable)
  • 10” motors, Three-Phase up to 116.0-252/85-185 HP/Kw (Rewindable)

High Motor Efficiency:

  • High efficiency electrical design for reduced running cost.
  • Submersible motor uses non-contaminating, water filled motor design.
  • Water lubricated thrust enables continuous maintenance free operation of Submersible motor.
  • The Submersible motors are ready to operate, providing frost protection down to -15~C.
  • For high performance in sand, sand slinger & shaft seal/mechanical seal are fitted in Submersible motor.
  • Standard Submersible motor with taping winding insulation for motor ambient of 30~C with a min.
  • NEMA Standard coupling dimensions.

Shaft Seal/Mechanical Seal

Shaft seal is used to provide optimum wear resistance and long life to stainless steel Submersible motors. It is spring loaded with larger surface area and sand shield, results in a high performance in sand without any penetration of particles and sand.

Protection against up Thrust

Borana’s both Submersible pumps and motors are protected against occurring of up thrust in the critical start up phase, thus avoid Submersible pumps and Submersible motors from damage.

Built-in Cooling Chambers

Borana’s all Submersible motors having efficient cooling chambers at the top and at the bottom. As long as inside the motor required liquid circulates, cooling of the motor will be efficient.

Our Products

Borana Brochure

Download  latest Full range of Borana Pumps Brochure

How Can We Help?

Enquire Now